Re-pointing the failed mortar on the chimney stack flaunches, re-dressing the lead flashings & replacement of broken tiles.
New Mortar
Replacement of missing or broken hip/roof tiles plus lifting, re-bedding & pointing of the hip & ridge tiles using new mortar.
Gutters Cleared
Repair Work
Preparing & sealing the lead gulley, chase on the lead flashings & bonds between the parapet wall coping stones.
Raking out & re-pointing the failed mortar on the chimney stack including the flaunch
Slate repairs, gutter clearance & re-pointing the failed mortar on the ridge tiles.
Preparing and rendering the chimney stack plus sealing the lap on the flat roof green mineral cap sheet.
New hopper heads & downpipes to re-direct the excess rain water run off & sealing the flashings at the abutment wall.
Re-bedding & pointing the ridge tiles which had been lifted to take the new breathable membrane over the apex of the roof.
Stripping off the concrete tiles, ridge tiles & lath battens to carry out repairs to the collapsing perished bitumen under felt using breathable membrane pitched roof underlay. This was installed under the bonding gutter over the party wall which has damp & mould all the way up it inside the property.
Capping off & flaunching the chimney stack, re-pointing the failed mortar on the stack & sealing the stench pipe/lead flashings/green mineral.
Rendering the remainder of the lowered chimney stack & sealing the gap between the back of the cast iron gutter and the tiles which has been causing damp inside the property.
Installation of new chimney stack flaunch & cowls.
Lowering the redundant chimney stack which has been causing damp inside the property.
