Yearly archive for 2025

Raking out and re-pointing the failed mortar inbetween the stone blocks using new lime mortar

Strip and re-cover of pitched roof using new over fascia vented eaves guard trays, Cromar Vent 3 Pro breathable membrane pitched roof underlay, 25mm x 50mm tanalised lath battens, GRP (Glassfibre Reinforced Polyester) dry fix bonding gutters over the party walls, anthracite grey smooth finish flat interlocking concrete roof tiles and angled concrete ridge tiles mechanically secured using dry fix ridge system

Strip and re-cover of pitched roof using new eaves guard trays, Cromar Vent 3 Pro breathable membrane pitched roof underlay, 25mm x 50mm tanalised lath battens, GRP (Glassfibre Reinforced Polyester) dry fix valley gutters, smooth flat anthracite grey interlocking concrete roof tiles, angled concrete ridge tiles mechanically secured using dry fix ridge system and black UPVC interlocking dry verge covers system

Strip and re-cover of pitched roof using new over fascia vented eaves guard trays, Cromar Vent 3 Pro breathable membrane pitched roof underlay, tanalised 25mm × 50mm lath battens, GRP (Glassfibre Reinforced Polyester) dry fix bonding gutters over the party walls, anthracite grey smooth finish flat interlocking concrete roof tiles and angled concrete ridge tiles mechanically secured using dry fix ridge system plus new code 4 milled lead flashings/back apron at the chimney stack

Installation of new Cromar Vent 3 Pro breathable membrane pitched roof underlay

Leak investigation

New anthracite grey smooth finish interlocking concrete roof tiles, code 4 milled lead flashings at the abutment wall and black UPVC interlocking dry verge covers system on the porch roof

Stripping off the porch roof and Installation of new rafters and Cromar Vent 3 Pro breathable membrane pitched roof underlay

Installation of new code 4 milled lead sheets on the dormer cheeks plus new Kingspan insulation, Cromar Vent 3 Pro breathable membrane pitched roof underlay and 25mm × 50mm tanalised lath battens

Stripping off the slates and lead sheets on the dormer

Removing the redundant chimney stack

Raking out and re-pointing the failed mortar inbetween the stone blocks using new lime mortar

Strip and re-cover of pitched slate roof using new eaves guard trays, Cromar Vent 3 Pro breathable membrane pitched roof underlay, tanalised 25mm × 50mm lath battens, code 4 milled lead sheets on the valley gutters and code 4 milled lead flashings plus new clay cap angle ridge tiles mechanically secured using dry fix ridge system

Raking out and re-pointing the failed mortar on the chimney stacks

Installation of new C16 grade 50mm × 100mm timber spars, timber firrings to give the new roof deck the correct flow  18mm Sterling OSB roof boards. Install new timber upstands at the verges. Install new timber drip edge, Classic Bond 1.2mm single ply rubber membrane cap sheet, white UPVC fascias, black UPVC half round guttering, brackets, unions, stop ends, running outlet, black UPVC round downpipe, brackets, off set bends and shoe, white UPVC trims at the drip edge and 150mm textured coated aluminium flashings at the abutment walls

Strip and re-cover of pitched roof using new eaves guard trays, Cromar Vent 3 Pro breathable membrane pitched roof underlay, tanalised 25mm × 50mm tanalised lath battens, code 4 milled lead sheets on the valley gutters, code 4 milled lead flashings, anthracite grey smooth finish flat interlocking concrete roof tiles, anthracite grey smooth finish angled concrete ridge tiles mechanically secured using dry fix ridge system, black UPVC interlocking dry verge covers system, black ash UPVC fascias and ventilated soffits, black UPVC half round guttering, black UPVC round downpipes and removal of the redundant chimney stack