Cleaning the UPVC gutters, fascias and soffits
Re-bedding and pointing the ridge tiles using new mortar
Re-fixing the slates replacing any that were damaged or broken
Stripping off the slates and lath battens to install new vapour permeable breathable membrane pitched roof underlay
Re-fixing the slates replacing any that were damaged or broken
Stripping off the old slates and lath battens to install new eaves felt support trays, vapour permeable breathable membrane pitched roof underlay, tanalised lath battens, new slates and hip tiles
Installation of new internal rain water goods to return the gutter flow
Applying red oxide primer to the rusty cast iron gutter
Clearing out the trough gutters
Installation of new black UPVC downpipe, brackets, underground drainage system and chimney pot/cowl for wood burner
Flat roof conversion to warm roof using polythene vapour barrier, Celotex 50mm insulation boards and Classic Bond EPDM rubber cap sheet plus lifting, re-bedding and pointing the concrete ridge tiles
Stripping off the ridge tiles, concrete roof tiles and lath battens
Repairs to the perished bitumen under felt using vapour permeable breathable membrane pitched roof underlay on concrete tiled roof
When this extension was built the angle of the pitch was far too low for this type of construction and should have been of a flat roof type. We have taken off the stone tiles, lath battens & under felt to install new insulation, 18mm Sterling OSB roof board, Classic Bond EPDM rubber cap sheet & white UPVC trim.
