Please feel free to leave any comments in the box below
Re-pointing and sealing the lead valley gutter plus replacement dry verge covers
Stripping off the lead flashings, concrete roof tiles and lath battens to install new breathable membrane pitched roof underlay at the abutment wall where the under felt was cut too short when the property was constructed causing water ingress
Re-building and pointing the stone blocks, string course and dentils at the top of the exterior wall followed by installation of newly refurbished cast iron guttering
Removal of dilapidated cast iron guttering
Slate repairs
Slate and lead repairs
Raking out and re-pointing the failed mortar on the chimney stacks and slate/lead repairs
Refurbishment of cast iron guttering
Re-bedding and pointing the ridge tiles
Re-fixing the concrete roof tiles and installation of new flashings
Installing the Classic Bond EPDM rubber cap sheet on the dormer flat roof
Installation of new breathable membrane at the dormer cheeks and re-fixing the concrete roof tiles
Stripping off the concrete roof tiles, rotten lath battens and perished bitumen under felt to install new breathable membrane pitched roof underlay and tanalised lath battens
Replacing the rotten timbers at the verges
Update; Ridge tiles re-bedded using new mortar and lead valleys sealed
Stripping off the slates to replace the rotten lath battens
